FieldSettings(bpy_struct)¶
base class — bpy_struct
- class bpy.types.FieldSettings(bpy_struct)¶
Field settings for an object in physics simulation
- apply_to_location¶
Effect particles’ location
Type : boolean, default False
- apply_to_rotation¶
Effect particles’ dynamic rotation
Type : boolean, default False
- distance_max¶
Maximum distance for the field to work
Type : float in [0, 1000], default 0.0
- distance_min¶
Minimum distance for the field’s fall-off
Type : float in [0, 1000], default 0.0
- falloff_power¶
Falloff power (real gravitational falloff = 2)
Type : float in [0, 10], default 0.0
- falloff_type¶
Type : enum in [‘SPHERE’, ‘TUBE’, ‘CONE’], default ‘SPHERE’
- flow¶
Convert effector force into air flow velocity
Type : float in [0, 10], default 0.0
- guide_clump_amount¶
Amount of clumping
Type : float in [-1, 1], default 0.0
- guide_clump_shape¶
Shape of clumping
Type : float in [-0.999, 0.999], default 0.0
- guide_free¶
Guide-free time from particle life’s end
Type : float in [0, 0.99], default 0.0
- guide_kink_amplitude¶
The amplitude of the offset
Type : float in [0, 10], default 0.0
- guide_kink_axis¶
Which axis to use for offset
Type : enum in [‘X’, ‘Y’, ‘Z’], default ‘X’
- guide_kink_frequency¶
The frequency of the offset (1/total length)
Type : float in [0, 10], default 0.0
- guide_kink_shape¶
Adjust the offset to the beginning/end
Type : float in [-0.999, 0.999], default 0.0
- guide_kink_type¶
Type of periodic offset on the curve
Type : enum in [‘NONE’, ‘CURL’, ‘RADIAL’, ‘WAVE’, ‘BRAID’, ‘ROTATION’, ‘ROLL’], default ‘NONE’
- guide_minimum¶
The distance from which particles are affected fully
Type : float in [0, 1000], default 0.0
- harmonic_damping¶
Damping of the harmonic force
Type : float in [0, 10], default 0.0
- inflow¶
Inwards component of the vortex force
Type : float in [-10, 10], default 0.0
- linear_drag¶
Drag component proportional to velocity
Type : float in [-2, 2], default 0.0
- noise¶
Amount of noise for the force strength
Type : float in [0, 10], default 0.0
- quadratic_drag¶
Drag component proportional to the square of velocity
Type : float in [-2, 2], default 0.0
- radial_falloff¶
Radial falloff power (real gravitational falloff = 2)
Type : float in [0, 10], default 0.0
- radial_max¶
Maximum radial distance for the field to work
Type : float in [0, 1000], default 0.0
- radial_min¶
Minimum radial distance for the field’s fall-off
Type : float in [0, 1000], default 0.0
- rest_length¶
Rest length of the harmonic force
Type : float in [0, 1000], default 0.0
- seed¶
Seed of the noise
Type : int in [1, 128], default 0
- shape¶
Which direction is used to calculate the effector force
Type : enum in [‘POINT’, ‘PLANE’, ‘SURFACE’, ‘POINTS’], default ‘POINT’
- size¶
Size of the turbulence
Type : float in [0, 10], default 0.0
- strength¶
Strength of force field
Type : float in [-1000, 1000], default 0.0
- texture_mode¶
How the texture effect is calculated (RGB & Curl need a RGB texture else Gradient will be used instead)
Type : enum in [‘RGB’, ‘GRADIENT’, ‘CURL’], default ‘RGB’
- texture_nabla¶
Defines size of derivative offset used for calculating gradient and curl
Type : float in [0.0001, 1], default 0.0
- type¶
Type of field
Type : enum in [‘NONE’, ‘FORCE’, ‘WIND’, ‘VORTEX’, ‘MAGNET’, ‘HARMONIC’, ‘CHARGE’, ‘LENNARDJ’, ‘TEXTURE’, ‘GUIDE’, ‘BOID’, ‘TURBULENCE’, ‘DRAG’], default ‘NONE’
- use_2d_force¶
Apply force only in 2d
Type : boolean, default False
- use_absorption¶
Force gets absorbed by collision objects
Type : boolean, default False
- use_global_coords¶
Use effector/global coordinates for turbulence
Type : boolean, default False
- use_guide_path_add¶
Based on distance/falloff it adds a portion of the entire path
Type : boolean, default False
- use_guide_path_weight¶
Use curve weights to influence the particle influence along the curve
Type : boolean, default False
- use_max_distance¶
Use a maximum distance for the field to work
Type : boolean, default False
- use_min_distance¶
Use a minimum distance for the field’s fall-off
Type : boolean, default False
- use_multiple_springs¶
Every point is effected by multiple springs
Type : boolean, default False
- use_object_coords¶
Use object/global coordinates for texture
Type : boolean, default False
- use_radial_max¶
Use a maximum radial distance for the field to work
Type : boolean, default False
- use_radial_min¶
Use a minimum radial distance for the field’s fall-off
Type : boolean, default False
- use_root_coords¶
Texture coordinates from root particle locations
Type : boolean, default False
- z_direction¶
Effect in full or only positive/negative Z direction
Type : enum in [‘BOTH’, ‘POSITIVE’, ‘NEGATIVE’], default ‘BOTH’
Inherited Properties
Inherited Functions
|
References
