SoftBodySettings(bpy_struct)¶
base class — bpy_struct
- class bpy.types.SoftBodySettings(bpy_struct)¶
Soft body simulation settings for an object
- aero¶
Make edges ‘sail’
Type : int in [0, 30000], default 0
- aerodynamics_type¶
Method of calculating aerodynamic interaction
Type : enum in [‘SIMPLE’, ‘LIFT_FORCE’], default ‘SIMPLE’
- ball_damp¶
Blending to inelastic collision
Type : float in [0.001, 1], default 0.0
- ball_size¶
Absolute ball size or factor if not manual adjusted
Type : float in [-10, 10], default 0.0
- ball_stiff¶
Ball inflating pressure
Type : float in [0.001, 100], default 0.0
- bend¶
Bending Stiffness
Type : float in [0, 10], default 0.0
- choke¶
‘Viscosity’ inside collision target
Type : int in [0, 100], default 0
- collision_type¶
Choose Collision Type
Type : enum in [‘MANUAL’, ‘AVERAGE’, ‘MINIMAL’, ‘MAXIMAL’, ‘MINMAX’], default ‘MANUAL’
- damping¶
Edge spring friction
Type : float in [0, 50], default 0.0
- effector_weights¶
Type : EffectorWeights, (readonly)
- error_threshold¶
The Runge-Kutta ODE solver error limit, low value gives more precision, high values speed
Type : float in [0.001, 10], default 0.0
- friction¶
General media friction for point movements
Type : float in [0, 50], default 0.0
- fuzzy¶
Fuzziness while on collision, high values make collision handling faster but less stable
Type : int in [1, 100], default 0
- goal_default¶
Default Goal (vertex target position) value, when no Vertex Group used
Type : float in [0, 1], default 0.0
- goal_friction¶
Goal (vertex target position) friction
Type : float in [0, 50], default 0.0
- goal_max¶
Goal maximum, vertex weights are scaled to match this range
Type : float in [0, 1], default 0.0
- goal_min¶
Goal minimum, vertex weights are scaled to match this range
Type : float in [0, 1], default 0.0
- goal_spring¶
Goal (vertex target position) spring stiffness
Type : float in [0, 0.999], default 0.0
- gravity¶
Apply gravitation to point movement
Type : float in [-10, 10], default 0.0
- location_mass_center¶
Location of Center of mass
Type : float array of 3 items in [-inf, inf], default (0.0, 0.0, 0.0)
- mass¶
General Mass value
Type : float in [0, 50000], default 0.0
- plastic¶
Permanent deform
Type : int in [0, 100], default 0
- pull¶
Edge spring stiffness when longer than rest length
Type : float in [0, 0.999], default 0.0
- push¶
Edge spring stiffness when shorter than rest length
Type : float in [0, 0.999], default 0.0
- rotation_estimate¶
Estimated rotation matrix
Type : float array of 9 items in [-inf, inf], default (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
- scale_estimate¶
Estimated scale matrix
Type : float array of 9 items in [-inf, inf], default (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
- shear¶
Shear Stiffness
Type : float in [0, 1], default 0.0
- speed¶
Tweak timing for physics to control frequency and speed
Type : float in [0.01, 100], default 0.0
- spring_length¶
Alter spring length to shrink/blow up (unit %) 0 to disable
Type : int in [0, 200], default 0
- step_max¶
Maximal # solver steps/frame
Type : int in [0, 30000], default 0
- step_min¶
Minimal # solver steps/frame
Type : int in [0, 30000], default 0
- use_auto_step¶
Use velocities for automagic step sizes
Type : boolean, default False
- use_diagnose¶
Turn on SB diagnose console prints
Type : boolean, default False
- use_edge_collision¶
Edges collide too
Type : boolean, default False
- use_edges¶
Use Edges as springs
Type : boolean, default False
- use_estimate_matrix¶
estimate matrix .. split to COM , ROT ,SCALE
Type : boolean, default False
- use_face_collision¶
Faces collide too, can be very slow
Type : boolean, default False
- use_goal¶
Define forces for vertices to stick to animated position
Type : boolean, default False
- use_self_collision¶
Enable naive vertex ball self collision
Type : boolean, default False
- use_stiff_quads¶
Adds diagonal springs on 4-gons
Type : boolean, default False
- vertex_group_goal¶
Control point weight values
Type : string, default “”
- vertex_group_mass¶
Control point mass values
Type : string, default “”
- vertex_group_spring¶
Control point spring strength values
Type : string, default “”
Inherited Properties
Inherited Functions
|
References
